Preparation
Preparation
9
8
Charging Your Hearing Aids
• Place your Miracle-EarCHARGE
™
start
custom hearing aids in the charger. Place
hearing aid faceplate facing downward
so battery contacts on hearing aid align
with charging posts within charger
• Your hearing aids will turn off automatically and begin to charge,
so long as your charger is plugged into an external power source
(i.e. wall outlet).
• Your hearing aids will automatically power on when removed from
the charger, so long as your charger is plugged into an external
power source (i.e. wall outlet).
• Upon plugging the charger into an external power source (i.e.wall
outlet), the hearing aid charging LEDs will turn on for a few
seconds to indicate connection to the power source.
• To illuminate the front LEDs, remove a hearing aid from its
charging port/post for three seconds and then re-insert it. LEDs
illuminate for 10 seconds before turning off.
• The LEDs corresponding to each hearing aid:
– Glowing Green = Charging
– Solid Green = Fully Charged
– Blinking Red = Fault State. To reset, remove the hearing aids
from charger, wait until LED turns off and re-insert aids. If
Fault State continues, call your Miracle-Ear
®
Hearing Care
Professional.
• Charging occurs with the lid open or closed; your hearing aids
will be fully charged in under 3 ½ hours.
• It is safe to store hearing aids in the charger after they are fully
charged and any time that you are not wearing them.
• If you will not be wearing your hearing aids for an extended
period of time (i.e. weeks), remove your hearing aids from the
charging ports/posts. You will need to manually power off the
hearing aids by pressing the user control on each hearing aid
for three seconds.
*
*Not all devices are configured to do this. Consult your Miracle-Ear Hearing Care Professional with questions.
