Pairing
13
Basic Use
12
Basic Use
1. To turn onMiracle-EarLINK
™
Table
Mic AV, press the power button.
2. The green segments indicate the
battery charge level.
3. Ensure your hearing aids are
powered on.
Note:
Prior to streaming audio
for the first time, your hearing
aids will need to be paired to
the Miracle-EarLINK
™
Table Mic
AV. Refer to
Pairing with Hearing
Aids
“Pairing” on page 13.
4. To start audio streaming, open the Miracle-Ear
®
app
and select Start Streaming from Accessories screen.
Refer to
Start/Stop Audio Streaming
on page 20 for additional
options.
5. To adjust the stream volume, press
the + or - button.
6. To stop streaming
turn off the
Miracle-EarLINK
™
Table Mic AV
.
Refer to
Start/Stop Audio
Streaming
on page 20 for additional options.
Pairing
For the Miracle-EarLINK
™
Table Mic AV to interact with
your hearing aids, you must first pair it with each hearing
aid. You only need to perform this action once, as the
Miracle-EarLINK
™
Table Mic AV and hearing aids should
automatically recognize each other when both are powered
on and within wireless operating range.*
To pair the Miracle-EarLINK
™
Table Mic AV with your
hearing aids:
1. Ensure your hearing aids are not connected to nearby
Bluetooth
®
devices. To do this,
• Disable Bluetooth on your mobile phone.
• Power off any nearby any other nearby
Miracle-EarLINK
™
Accessories, which you previously
paired to your hearing aids.
• Power off, then power on your hearing aids.
Note:
For a CROS hearing aid system, power off
both your hearing aid and CROS transmitter.
Power on only your hearing aid, ensuring the CROS
transmitter remains powered off.
*Typical operating range is up to 10 meters (~30 feet). Operational range may be
reduced by environmental factors, such as obstructions, interference, and human
body positioning. Larger operational distances are achievable, though audio quality
and connectivity may decrease.
