21
20
Charging hearing aids
X
Place the right hearing aid in
the charging slot marked with
an “R”, and the left hearing aid
in the charging slot marked
with an “L.”
X
Stow the ear pieces gently.
X
Close the charger's lid to save
battery power.
X
The hearing aids are
automatically turned off and
start charging. The charging
status is shown for 7 seconds.
If the status LEDs do not light up when you insert the hearing aids,
check the following:
●
The hearing aids are not correctly placed. Push them slightly
into their charging slots or close the charger's lid.
●
The charger is turned off. Press and hold the button for
5 seconds to turn on the charger.
●
The charger's internal battery is too low for on the go charging.
Connect the charger to an electrical outlet.
NOTICE
If you put a hearing aid in the wrong charging slot, the
receiver cable may be damaged when closing the charger's
lid.