Basic Operation
12
The window displays the satellites included
in the RAPS file. As the RAPS lists are
available via the satellite Astra 19.2°, Astra
19.2° is already marked (and cannot be
deselected!).
Select a satellite by pressing the keys
PR+
and
PR-.
Press
OK
to select a non-marked satellite.
Press
OK
to deselect a marked satellite.
Press
to go to the next window
RAPS select raps file
.
Examples:
•
Your antenna system is designed for re-
ceiving Astra 19.2°E and Hotbird 13°E.
These satellites are found and marked in
the list. You are planning to soon extend
your antenna system for receiving of Euro-
bird 9A 9°E. You can additionally mark Eu-
robird 9A 9°E already now to avoid repeat-
ed installation in the future.
•
Your antenna system is designed for re-
ceiving Astra 19.2°E and Türksat 42°E.
However, the receiver in the children's
room should only receive the German
channels. For this, manually deselect Tü-
rksat 42°E (found by RAPS-DiSEqC scan).
5.6.1
Country
Select the country in which you want to
use the receiver - and correspondingly also
the RAPS list - by pressing the keys
PR+
and
PR-
. The selectable countries are
based on your satellite selection as per
section “Satellite List”.
Press
OK
to go to the next window
Your
regional channel
.
5.6.2
Regional Channel
Select your preferred regional channel
(which will be stored at number three in the
channel list) by pressing the keys
PR+
and
PR-
.
Press
OK
to go to the next window
Chan-
nel-Filter
; here you can select if you want
to include erotic channels and call TV
(channels that may incur quite high tele-
phone costs due to telephone calls to the
channel) into the channel list.
5.6.3
Channel Filter
Select Erotic and/or Call TV by pressing
the keys
PR+
and
PR-
, and select the op-
tion (
Yes
) to include such channels into the
channel list or (
No
) to not include such
channels by respectively pressing
/
.
Press
OK
to store your settings and to
finish installation of the RAPS channel list.
After this, TV operation will automatically
start.
5.7
Select Operation Mode
TV is the operation mode after
first switching-on of the receiver
(or after restoration of factory
settings).
Summary of Contents for BOX2IP
Page 1: ......
Page 44: ...Doc ID 14022001 ...
