Basic Operation
13
You can select between the operation
modes TV (TV channels) and RADIO (radio
channels) as follows:
Press the key
TV/RADIO
on the remote
control.
Press again the key
TV/RADIO
to return to
the previous operation mode.
5.8
Call/Leave Menu
To call the menu, press the key
MENU
(of
the remote control or at the receiver).
The menu is called.
The following is displayed in the headline of the
various menu windows:
1. Name of menu window
2. Current date
3. Current time
Press the
EXIT
key to leave the menu or to
go back one step.
It could be possible that you have to
press
EXIT
several times to go back
to TV mode.
5.9
Menu Navigation
The menu items with the settings for TV and
radio can be respectively accessed in the two
operation modes TV and Radio.
Press
PR+
to select the menu item above.
Press
PR-
to select the menu item below.
Press
to change resp. increase the
selected value.
Press
to change resp. decrease the
selected value.
Instead of changing a value by us-
ing the keys
/
, with
many menu items you can also
press the
OK
key, select a new val-
ue from the list, and confirm such
value by again pressing the
OK
key.
Active menu items are color-marked.
Although most settings for TV operation are
made, you can also make some further set-
tings via the menu.
5.10
Parental Lock
In the sub-menu
Parental Lock
you can lock
access to certain menus by using a PIN (e.g.
for protection of your settings) or block selec-
tion of certain channels by using a PIN.
Access the sub-menu Parental Lock as
follows:
1. Press the
MENU
key.
2. Select the menu
System Setup
.
3. Select
Parental Lock
and confirm by
pressing
OK
.
After entry of password, you may
−
set if access to the sub-menus is pro-
tected by password,
by selecting the
Menu Lock
and select-
ing
Off
or
On
by using the keys
/
;
−
set if certain channels are to be locked
by a PIN,
by selecting
PIN
and selecting
Off
or
On
by using the keys
/
; or
−
change the password:
Select the field
New Password
.
Enter a new password.
Go to the field
Confirm Password
.
Again enter the new password.
4. Press
OK
to save your changes and to
leave the sub-menu.
5.11
Set Time
Reasonable operation of the receiver requires
setting of system time. By default, the receiver
Summary of Contents for BOX2IP
Page 1: ......
Page 44: ...Doc ID 14022001 ...
