Guide to Installation and Operation
4
|
ADC-191p
3.2 CAV Inputs
The CAV inputs consist of green, blue, and red color
coded male BNC connectors. Male connectors are
provided so as to connect the ADC-191p directly to
source equipment. The supported CAV input standards
are SMPTE/EBU and Betacam. The Betacam standard
can be set with or without setup. The input Y/B-Y/R-Y
signals are to be connected to the green, blue, and red
BNCs respectively
Refer to section 4.0, Operation in order to select the
desired input CAV standard.
.
3.3 4:2:2 Output
The 4:2:2 serial digital output signal is provided by the
BNC labeled 4:2:2 OUT. The 4:2:2 output signal
conforms to the SMPTE 259M-C standard..
