GUIDE TO INSTALLATION AND OPERATION
CPU-ETH2 |
9
Using the Menu
The local control panel menu can also be used to enter these values:
Hint: the first time you set up the CPU-ETH2 card, get the Network details from your IT manager and install them on
the card using the menu. The card will then be easy to find using iControl applications
.
The data entry points are found in the menu under ETH1 OPTIONS and ETH2 OPTIONS. Note that the Hostname is
reported in the menu but cannot be changed from there.
5.3.4 Topic – SNMP functionality
The CPU-ETH2 card can function as an SNMP agent, sending
SNMP traps to designated targets. The SNMP agent can also be
polled to obtain the frame status.
Open the NETWORK panel and select the SNMP tab.
Click the Activate SNMP Agent box to activate this feature
Enter the IP addresses of up to three SNMP trap targets in the
boxes provided.
Using the Menu:
SNMP activation and the three target IP addresses can be
entered in the menu via the SNMP OPTIONS item.
USO
RESTRITO