GUIDE TO INSTALLATION AND OPERATION
12
| CPU-ETH2
5.3.8 Topic – Alarms
The CPU-ETH2 controller generates
alarms for the frame in which it is
installed when error conditions are
detected. The iControl Alarm
Configuration panel allows the alarm
reporting of the CPU-ETH2 to be
configured.
The panel opens in a new window
when the
Alarm Config.
button is
clicked, and can be resized if
needed.
The panel is organized in columns.
Status/Name
This contains an expandable tree listing all the alarms reported by this CPU-ETH2 controller.
•
Each alarm name includes an icon that shows its current status
The
Overall alarm
and
GSM contribution
columns contain pulldown lists that allow the level of contribution of each
individual alarm to the alarm named in the column heading to be set.
Click on the alarm icon to see the available levels; then click on one to select it
Overall Alarm
This column allows configuration of the contribution of each individual alarm to the Overall Alarm associated with this
card. The Overall Alarm is shown in the upper left corner of the iControl panel, and also appears at the bottom of the
Status/Name column.
GSM Contribution
This column allows configuration of the contribution of each individual alarm to the GSM Alarm Status associated with
this card. GSM is a dynamic register of all iControl system alarms, and is also an alarm provider for external
applications. The possible values for this contribution are related to the Overall alarm contribution:
•
If the Overall alarm contribution is selected as Disabled, the GSM alarm contribution can be set to any available
value
•
If the Overall alarm contribution is selected as any level other than disabled, the GSM contribution is forced to
follow the Overall Alarm.
USO
RESTRITO
