GUIDE TO INSTALLATION AND OPERATION
CPU-ETH2 |
13
Levels associated with these alarms:
The pulldown lists may contain some or all of the following options:
The alarm makes no contribution (black icon)
The alarm is of minor importance (yellow icon)
The alarm is of major importance (orange icon)
The alarm is of critical importance (red icon)
The alarm exists but has no effect (used for text and composite alarms)
Shortcut: if you click in one of the Set All boxes beside a section heading, you will open a pulldown that lets you
assign a level to all alarms in that section of the column simultaneously.
.
Once the alarms are configured, you may accept the changes or discard them:
Log Events
iControl maintains a log of alarm events associated with the card. The log is useful for troubleshooting and identifying
event sequences. Click in the checkbox to enable logging of alarm events for each individual alarm.
At the bottom of the window are several other controls
Copy to other cards
Click this button to open a panel that allows the alarm
configuration set for this card to be copied into other CPU-ETH2
controllers in other frames.
•
Select one or more destination controllers from the list in the
window by clicking in the checkboxes, or all of them by
clicking in the
All
checkbox
Get alarm keys
Click this button to open a save dialog where you can save a file
containing a list of all alarms on this controller and their current
values, along with an Alarm Key for each. The alarm keys are
useful for system integration and troubleshooting.
•
The file is saved in .csv format
USO
RESTRITO