GUIDE TO INSTALLATION AND OPERATION
HDA-1861 |
9
Rear adapters:
3-RU rear module adapters are available for Single and Double Densité-2
rear panels:
o
DENSITE
DRP-3RU
o
DENSITE
SRP-3RU
Install these as follows:
1. Position the adapter at the top of the empty
slot(s) on the rear of the frame.
2. Use the captive screw in the adapter to
fasten it securely in position.
3. Slip the top of the 2RU rear panel into the slot
at the bottom of the adapter, and secure it to
the frame using the captive screw at the
bottom of the panel.
