HDA-1832 HD/SD Reclocked Digital Video DA
Guide to Installation and Operation
Page 2 of 4
HDA-1832
UNPACKING
Make sure the following items have been shipped
with your HDA-1832. If any of the following items are
missing, contact your distributor or Miranda
Technologies Inc.
*
HDA-1832 HD/SD Reclocked Digital Video DA
*
HDA-18NN-DRP or -SRP rear panel
INSTALLATION
The HDA-1832 must be mounted in a DENSITÉ
frame. The installation includes both the HDA-1832
module, and the rear panel module. It is not
necessary to switch off the frame’s power when
installing or removing the HDA-1832.
Detailed instructions for installing cards and their
associated rear panels in the Densité frame are given
in the Densité Frame manual.
Rear panel installation
Note that the HDA-1832 has nine outputs, and
making these available on BNC connectors at the
rear of the frame requires a double-width rear panel.
When a double–width rear panel is used, the module
must be installed in the right-most slot in order to
mate with the rear-panel connectors. If it is placed in
the wrong slot, the front panel LED will flash red.
Move the card to other slot for correct operation. No
damage will result to the card should this occur.
Should you require four or fewer outputs, you can
free up a slot in the frame for another card by using
the optional single-width rear panel HDA-18NN-SRP.
This panel brings outputs 1 to 4 to the four BNC
output connectors.
OPERATION
Overview
The HDA-1832 is equipped with an on-board LED
status indicator, mounted on the front edge of the
card so as to be visible from the front of the card
frame, even when the frame door is closed. The
functionality of this status monitor is described
below.The DENSITÉ frame incorporates a central
controller card, located in the center of the frame,
which is equipped with an LCD display. The card
handles error reporting and remote control for all
cards installed in the frame. The display shows the
error status of any card in the frame whose SELECT
button has been pushed.
HDA-1832
SDA-1101 - SD DIGITAL VIDEO DISTRIBUTION AMPLIFIER
Select
Status
Status LED
SELECT button
Single Double
HDA-18NN Rear Connector Panel
