background image

HDA-1832 HD/SD Reclocked Digital Video DA 
Guide to Installation and Operation 

 

Page 4 of 4 

HDA-1832 

HDA-1832 Menus 

 
 

(SIGNAL UNKNOWN – NO LOCK - NO SIGNAL - 143 Mb/s – 270 Mb/s – 360 Mb/s – 540 Mb/s 
– 1.48 Gb/s ) 

 

(NO REAR, SINGLE REAR, DOUBLE REAR) 

 

(VERSION xxx) 

 
 
 

(GREEN, YELLOW, RED, FLASH_RED) 

 
 
 

(NONE, GPI) 

 
 
 

(GREEN, YELLOW, RED, FLASH_RED) 

 
 
 

(NONE, GPI) 

 
 
 

(RESTORE) 

 

 
 

 
 

 

COMPLIANCE 

 

Radio Frequency Interference and Immunity 

 
This unit generates, uses, and can radiate radio frequency energy.  If the unit is not properly installed and used in accordance with this 
guide, it may cause interference with radio communications.  Operation with non-certified peripheral devices is likely to result in interference 
with radio and television reception.  This equipment has been tested and complies with the limits in accordance with the specifications in: 
 
 

FCC Part 15, Subpart B 

 

CE EN50081-1:1992 

 

CE EN50082-1:1992.

 

 
CONTACT MIRANDA

 

For technical assistance, please contact the Miranda Technical support centre nearest you: 
 

 
Americas 

Telephone:  

  +1-800-224-7882 

e-mail: 

  techsupp@miranda.com 

 
Asia 

Telephone:  

  +81-3-5730-2987 

e-mail: 

  asiatech@miranda.com  

 

 

 
Europe, Middle East, 
Africa, UK 

Telephone:  

  +44 (0) 1491 820222 

e-mail: 

  eurotech@miranda.com 

 

 
France (only) 

Telephone:  

  +33 (0) 1 55 86 87 88 

e-mail: 

  francetech@miranda.com 

 

 

Visit our web site at 

www.miranda.com

 

STATUS 

CONFIG ALARM 

FACTORY DEFAULT 

NO SIGNAL 

ALARM LEVEL 

ALARM REPORT 

ALARM REPORT 

ALARM LEVEL 

NO LOCK 

Summary of Contents for HDA-1832

Page 1: ... This multi rate feature makes the HDA 1832 ideal for applications where HD and SD signals may coexist The HDA 1832 is designed for use in the DENSITÉ frame FEATURES HD SDI input 9 HD SDI reclocked outputs Supports HD SDI 1 48 Gbps Supports SD SDI 143 540 Mbps 110 m automatic cable equalization Signal presence detection with remote reporting SPECIFICATIONS INPUT Signal HD SDI SMPTE 292M 1 48 Gbps ...

Page 2: ...slot in order to mate with the rear panel connectors If it is placed in the wrong slot the front panel LED will flash red Move the card to other slot for correct operation No damage will result to the card should this occur Should you require four or fewer outputs you can free up a slot in the frame for another card by using the optional single width rear panel HDA 18NN SRP This panel brings outpu...

Page 3: ... conditions can be reconfigured by the user User Interface Push the SELECT button on the front edge of the HDA 1832 to see a report of the current error status on the DENSITÉ frame s controller card display The HDA 1832 has three possible status messages STATUS SIGNAL UNKNOWN NO LOCK NO SIGNAL 143 Mb s 270 Mb s 360 Mb s 540 Mb s 1 48 Gb s NO REAR SINGLE REAR DOUBLE REAR VERSION XXX The STATUS LED ...

Page 4: ... certified peripheral devices is likely to result in interference with radio and television reception This equipment has been tested and complies with the limits in accordance with the specifications in FCC Part 15 Subpart B CE EN50081 1 1992 CE EN50082 1 1992 CONTACT MIRANDA For technical assistance please contact the Miranda Technical support centre nearest you Americas Telephone 1 800 224 7882 ...

Reviews: