GUIDE TO INSTALLATION AND OPERATION
26
| HMP-1801
The Clip List properties are:
Parameter
Contents
Number of clips
Number of clips in the Clip List
End Clip Behavior
What happens when the clip is finished
playing. Possible values are:
•
Black, Hold last frame, Cue first
frame
Auto Play
If this Clip List is cued with Auto Play ON,
it will begin playback automatically.
Loop Count
Number of times the Clip List will be
repeated
Video Format
Format of the video essence.
Click on the box beside a Clip List to expand it and see its contents
It will contain the number of individual clips indicated in the Clip List
properties window described above.
Click on a clip in the expanded Clip List to select it
•
The selected clip is highlighted
The characteristics of the selected clip can be displayed by clicking the
Properties
button above the window.
•
These characteristics are specified using the
Ingest and
Configuration Utility
, as described in Section 4.1.3.3.
•
They cannot be changed here
Parameter
Contents
AFD Insertion
Gives the static AFD code of the clip
Name
Name of the clip
Image position
Location of the top-left corner of the image on the
screen, in pixels (X=horizontal, Y=vertical)
Video essence Output #1
The name of the video essence used in this
clip. This is the Fill essence in a Key/Fill
operation.
Left eye in stereoscopic playback
Video essence Output #2
Key essence: must be of the same video
format & duration as the Fill essence. It must
be coded with a bit rate less than 70 Mbps in 60 HZ, and less than 60 Mbps in 50 Hz.
Right eye in stereoscopic playback
Hold First Duration
How many frames to hold the first frame after Play is activated, before beginning to
play the clip.
Fade-in Duration
How many frames to fade up from black when play is activated
Figure 3.17 Clip List Properties
Figure 3.18 Clip Properties
