GUIDE TO INSTALLATION AND OPERATION
48
| HMP-1801
To change the current selection:
Click on the
Change AFD
button beside the AFD icon
•
The
Select AFD
window opens, showing icons and
descriptions representing the various AFD codes that
are
available
Click on an icon to select it, and then click OK to confirm it
as the
new AFD value and close the Select AFD window. If you
click
Apply, the AFD is selected, but the Select AFD window
remains open. If you click Cancel, the selected AFD code
does
not replace the original one, and the window closes.
•
The selected AFD code will be inserted in the video
output
of the HMP-1801
•
If AFD=0 (the first choice in the window) is chosen, no
AFD
code will be inserted at the HMP-1801 output
Note: in Fill and Key mode, the AFD associated with the
Fill
essence will be inserted into both Fill and Key outputs.
Delete:
remove the selected essence from the list and delete it from the HMP-1801’s memory.
Export:
export a video essence to a computer via the rear-panel ethernet port.
•
Click the Export button
A
Select save directory
window opens showing a tree of the files on the
connected computer
•
Navigate to the folder in which the essence is to be saved, and click on it to
select it
You may select Make New Folder
•
Click Open at the bottom of the window
The file will begin to download to the selected folder
•
The
Jobs
window will open
The progress of the current export will be tracked
•
The essence will be saved as an
.mhv
file
Figure 4.8 Select AFD window
