GUIDE TO INSTALLATION AND OPERATION
HMP-1801 |
53
A Clip List consists of a sequence of one or more clips, and the lower part of the
Editing Clip List
window is devoted to
the definition of the clips that make up the Clip List.
Clips only exist within the context of a Clip List.
Each clip is represented by an icon in the section to the left of the window
•
The currently selected clip is highlighted on a purple background
•
Scroll up and down the list using the Up and Down buttons at the top (mainly useful if the list has too many clips
to show at one time)
To
select
a clip, click on it or use the Up and Down buttons to scroll to it.
To
add
a clip to the Clip List, click the
Add
button at the bottom
•
A new blank clip is added to the list
•
You must define its contents in the clip details section
To
delete
a clip from the Clip List, select it and click the
Del
button at the bottom
•
Video and audio essences associated with the clip are not deleted, and remain in the HMP-1801 memory
The
Clip Details
section on the right shows all the parameters of the selected clip and the icon shows those that
are editable.
•
Clip Name
– enter a suitable name in the text box
•
Video Duration
– calculated from the duration of the video essence, plus any extra frames added before and
after (see
Hold First duration
and
Hold last duration
below)
•
Video Format
– as specified when the Clip List was created
•
AFD insertion
– as selected in the video essence edit procedure
•
X-offset
– horizontal image position relative to the top left of the image (0 pixels to max allowed by the format,
e.g. 1920 pixels for 1920x1080 video)
•
Y-offset
– vertical image position relative to the top left of the image (0 pixels to max allowed by the format, e.g.
540 lines for 1920x1080 video)
•
In/Out Frame Markers
– shows the frame numbers within the video essence of the start and end of playback
(set in the advanced editing controls – see below)
•
Video essence Output#1
– Use the pulldown to select the video essence for this clip. Only essences in the
video format of the Clip List are shown. In 3D mode, right eye for stereoscopic playback.
•
Video essence Output#2
– Key source: must be of the same video format & length as the Fill essence, and
must be coded with a bit rate less than 70 Mbps in 60 Hz, and les than 60 Mbps in 50 Hz. Essences that do not
meet this requirement will appear in red and the reason will be shown in tool tip. In 3D mode, Left eye for
stereoscopic playback.
•
Hold first duration
– Select a number of frames to freeze on the first frame after Play is triggered before
beginning playback of the Clip
•
Fade-in duration
– Select the number of frames to fade up from black when play is initiated
•
Hold last duration
– Select a number of frames to freeze on the last frame of the clip after the last frame has
been played, as part of the clip playback.
•
Fade-out duration
– Select the number of frames to fade down to black at the end of the clip
•
Play count
– select the number of times the clip is to be repeated before the end behavior is activated. 0
means continuous play
