GUIDE TO INSTALLATION AND OPERATION
HMP-1801 |
61
Import
To restore the contents of the HMP-1801 Compact Flash from a file saved on an external storage medium:
1. Click the import button to gain access to the import file controls.
•
The process restores the entire compact flash memory
2. Click
Browse
to open an
Open
dialog
3. Navigate to the location where you saved the backup file
4. Click on the backup file to select it and then click Open, or, double-click the file
•
HMP-1801 backup files have the file type .mhb
5. You will be returned to the Export window with the file address in the “Select Input File” window, and the
Start
Import Process
button enabled.
•
Note that importing an .mhb archive will first remove all the current contents of the CF card, and then
replace them with the contents of the archive
6. Click the
Start Import Process
button
•
The status of the import will be indicated in the window beside the 5 steps on the left-hand side
•
Click
Stop
if you want to abort the save
4.1.6 Refresh All
The
Refresh All
button forces a file synchronization with the HMP-1801 card. In normal use, the list should always be
up to date and a refresh would not make any difference. However, when many Web applications are started at the
same time or if the card is used with the Vertigo XMS software, a refresh might be needed in order to get to files
transferred by the other applications.
