Miranda imagestore 750 User Manual Download

Page: 371 / 423

Imagestore 750 User Manual

Dolby Decode/Encode

Miranda Technologies Inc.

Page 371

Lt/Rt Center Mix Level

This setting indicates the nominal down mix level of the centre channel with
respect to the left and right channels in a Lt/Rt down-mix.

•

1.414 (+3.0dB)

•

1.189 (+1.5dB)

•

1.000 (0.0dB)

•

0.841 (-1.5dB)

•

0.707 (-3.0dB)

•

0.595 (-4.5dB)

•

0.500 (-6.0dB)

•

0.000 (-inf dB)

Note: The meaning of this field is only defined as described if the

audio coding mode is 3/0, 3/1 or 3/2. If the audio coding mode is
1/0, 2/0, 2/1, or 2/2 then the meaning of this field is Reserved.

Lt/Rt Surround Mix Level

This setting indicates the nominal down mix level of the surround channels
with respect to the left and right channels in a Lt/Rt down-mix.

•

0.841 (-1.5dB)

•

0.707 (-3.0dB)

•

0.595 (-4.5dB)

•

0.500 (-6.0dB)

•

0.000 (-inf dB)

Note: The meaning of this field is only defined as described if the

audio coding mode is 2/1, 3/1, 2/2 or 3/2. If the audio coding
mode is 1/0, 2/0 or 3/0 then the meaning of this field is Reserved.

Lo/Ro Center Mix Level

This indicates the nominal down mix level of the centre channel with respect
to the left and right channels in a Lo/Ro down-mix.

Summary of Contents for imagestore 750








































































































































































































































































































































































































































Search results

Summary of Contents for imagestore 750

Reviews:

Related manuals for imagestore 750

Brands by name

Popular brands

Miranda imagestore 750, User Manual

Search results

Summary of Contents for imagestore 750

Reviews:

Related manuals for imagestore 750

Brands by name

Popular brands