Miranda Kaleido-X User Manual Download

Page: 231 / 407

Configuring Clocks

223

– In the case of an analog or combo clock, if the clock is to be displayed against a pink background—

RGB (255, 0, 255) or similar—, or if the current layout belongs to a cascade room (see page 65),
then make sure to clear the

Border antialiasing

check box:

In such cases, if border antialiasing remains enabled, the clock will have a pink outline on the
monitor wall.

4. Define actions associated to this layout element (see “Creating Monitor Wall Actions” on page 239).

5. On the

File

menu, click

Save

. Alternatively, click the Save button on the toolbar.

Inserting a Clock Logo

To insert a clock logo:

1. Click the

Layouts

tab, and open the layout that contains the clock whose background logo you wish to

set.

2. Click the clock.

3. In the

Properties

pane, click the

Logo

box, under

Appearance

4. Click the button that appeared at the end of the box.

The

Select Image

window appears.

5. If the image you wish to use is not already listed in

Select Image

, then click the

Open

button

open the

Browse Image

window. Locate the image, select it, and then click

Open

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Search results

Summary of Contents for Kaleido-X

Reviews:

Related manuals for Kaleido-X

Brands by name

Popular brands

Miranda Kaleido-X, User Manual

Search results

Summary of Contents for Kaleido-X

Reviews:

Related manuals for Kaleido-X

Brands by name

Popular brands