Miranda Kaleido-X User Manual Download

Page: 261 / 407

Setting Room Preferences

253

Room-level settings

2. Modify the room preferences as needed.

3. On the

File

menu, click

Save

. Alternatively, click the Save button on the toolbar.

Assigning Room Layouts to the RCP2’s Preset buttons

To assign room layouts to the RCP2’s preset buttons:

1. In the main window, click the

RCP users

tab, and then select the room for which you wish to configure

layout presets, from the hierarchical list.

2. For each RCP preset button, click the corresponding box in the

Properties

pane, and then select the

appropriate layout from the list:

Note:

An asterisk (*) will appear beside the room in the main pane, if any of its properties are modified.

The asterisk will disappear when the changes are saved.

Summary of Contents for Kaleido-X
























































































































































































































































































































































































































Search results

Summary of Contents for Kaleido-X

Reviews:

Related manuals for Kaleido-X

Brands by name

Popular brands

Miranda Kaleido-X, User Manual

Search results

Summary of Contents for Kaleido-X

Reviews:

Related manuals for Kaleido-X

Brands by name

Popular brands