44
Peripheral Equipment
Operation
2
Verification (step 3 of 3)
To verify that your RCP2 is updated properly, do the following:
1. On the RCP2, press and hold ENTER for 10 seconds or so, until you see the
Configuration
menu.
2. Select the option DEVICE INFO, and then press ENTER.
3. Select the first option, VERSION, by pressing ENTER again.
The RCP2 displays the currently-installed version of the firmware.
If this number matches the version number in the updater file that you selected in the in the first step
(see “Firmware Selection (Step 1 of 3)” on page 41), then the update has been successful.
4. In the
Kaleido-RCP2 Updater
window on your PC, click
Close
to exit the updater.
Operation
Many of the operational functions of the Kaleido-RCP2 are determined by the configuration of the Kaleido-
X16 operating environment, and are explained in the
Kaleido-X16 User’s Manual
.
Selecting a Position and Logging On
To use your Kaleido-RCP2, you must validate your access to the Kaleido-X16 system. Press the LOGIN key,
and select the appropriate position that corresponds to the type of user you are. You may require a
password to log on. A room is supposed to be already set through the configuration menu of the device.
Here is a graphical summary of the login menu as it appears on the RCP2’s LCD display:
The following table shows how to change the login position. As an example, the position will be changed
from
TD01
to
TC01
. To accomplish this task, you must have first selected a room (see “Selecting a Room”
on page 33).
To display the Login menu on the LCD,
press the LOGIN key. Then, you can
access any submenu, or select values,
by pressing ENTER. Press ESC to cancel a
selection, or to return to the previous
menu level. Press
8
to navigate from
one menu option to the next. Press
2
to
go back to the previous option.
The available login positions
depend on the room you selected
from the Configuration menu.
Scroll up and down the list, by
pressing the
8
and
2
buttons.
The password can include up to 8
digits, that you can type by pressing
the digit buttons on the keypad. If you
make an error, press DEL and type the
password again. When you are done
press ENTER to validate the password.
Summary of Contents for Kaleido-X16
Page 4: ......
Page 32: ...26 Kaleido X16 Installation Replacing a Defective Power Supply 1 ...
Page 80: ...74 Specifications Physical Dimensions 3 ...
Page 82: ......