20
Rev 1.0 • 18 Aug 10
4. Configuration
Button Definitions
Salvo
Any
The salvo button executes a system salvo immediately.
During configuration, when you assign a salvo button, a drop-down
menu appears: ‘Salvo’. Choose a salvo from the list. The ‘None’ entry is
merely a placeholder. Do not choose ‘None’.
The button type is not available unless you have checked ‘Use as Slave
Panel’.
Source
Any
The button selects a source. The source name appears in the ‘Status’ dis-
play.
Pressing a source button completes a take.
When the panel is an NV9602 extension, the source name appears in the
‘Status’ display of the NV9602.
The nature of source buttons differs according to your configuration:
• Stand-alone panel.
When you assign a source button, one drop-down menus appear:
‘Source Device’.
• NV9602 extension (you have checked ‘Use as Slave Panel’).
When you assign a source button, two drop-down menus appear:
‘Source Device 1’ and ‘Source Device 2’. These correspond to the
two source sets. If there is a ‘Source Shift’ button on the panel, the
operator can switch between the two sets. When the first set is
selected, pressing the button selects device 1. When the second set is
selected, pressing the button selects device 2.
Note that when an NV9602 is in multi-destination mode, the only
operable buttons on the NV9604 are salvo buttons.
Undefined
Any
This button type is a placeholder: during configuration, it makes the but-
ton undefined and inactive. On the actual panel, the undefined button
remains unlit (dark).
Type
Modes Description
