Installing Appliance Components
24
2
Opening and Closing the Appliance
w
Whenever you need to lift the appliance, get others to assist you. To avoid injury, do
not attempt to lift the appliance by yourself.
c
Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Mirapoint is not covered by your
warranty. Read and follow the safety instructions that came with the product.
Opening the Appliance
To open the appliance:
1.
Power off the appliance, and attached peripherals, and disconnect the appliance
from the electrical outlet and peripherals.
2.
If installed, remove the front bezel (
3.
Rotate the latch release lock on the appliance cover counter clockwise to the
unlocked position (
4.
Lift up on the latch on top of the appliance and slide the cover back (
5.
Grasp the cover on both sides and lift the cover away from the appliance.
Closing the Appliance
To close the appliance:
1.
Lift up the latch on the cover.
2.
Place the cover onto the chassis and offset the cover slightly back so that it
clears the chassis hooks and lays flush on the appliance chassis (
page 25).
3.
Push down the latch to lever the cover into the closed position.
4.
Rotate the latch release lock in a clockwise direction to secure the cover.
Summary of Contents for 7700 Series
Page 6: ...6 ...
Page 10: ...10 Preface ...
