166
Using the Configurator
The
Add circuit adders
window appears.
Figure 127 Add circuit adders
3. In
the
Adder Type
menu, click the type of adder you want to add. For example:
•
8 Input Adder - 8 Ckts
: a DM-1008A input module with 8 class B (4 class A) input
circuits.
•
Supv Opt. Adder - 4 Ckts
: a SGM-1004A signal module with 4 supervised output
circuits.
•
Relay Opt. Adder - 8 Ckts
: an RM-1008A relay module with 8 relay circuits.
4. Click
Add
.
5. Click
Close
.
19.21 Adding a Loop Controller
Add a loop controller
1. Select the node that you want to add a loop controller to.
2. Click
Insert
in the menu bar, then click
Add Loop Controllers
.
The
Add Loop Controller
window appears.
Figure 128 Add Loop Controller
3. Select the type of loop controller that you want to add from the
Type
pulldown menu.
4. Type the number of loop controllers that you want to add in the
Number to add
field.
5. Type a description for the new loop controller in the
Tag
field.
6. Click
Add
.
The Configurator adds the loop controllers.
