LT- 6905 Rev. 1
April 2018
Page
3
of 3
Mounting the Fire Alarm Chassis into the BBX-1024XT(R)
Install the chassis into the BBX-1024XT(R) enclosure as shown below in Figure 4. Use four (4)
8-32 nuts to connect the Chassis to the BBX-1024XT(R). Connect all green ground wires to the
dimple in backbox and secure them using a #8 screw. Ensure that this ground connection leads to
an earth ground. Connect the battery cables to the batteries. Refer to the fire alarm panel
installation manual for more information.
Figure 4:Mounting Fire Alarm Chassis into BBX-1024XT(R)
