background image

Programming

8

Editing Records

To edit a record, you must be in 

Programming Mode

. Refer to 

Entering Programming Mode

 on 

page 2 for instructions

Step 1: Enter Edit Record mode

1.

Press 

 (scroll up) or 

 (scroll down).

2.

Press 

 when the arrow is pointed beside “Edit 

Record”. The display enters Edit Record mode.

Step 2: Select record

1.

Press 

 (scroll up) or 

 (scroll down) to find the 

record you want to change.

2.

Press 

 when the arrow is beside the record you 

want to change. The display now enters the record. 

Note: Records are listed according to resident dial 
code.

Step 3: Enter Dial Code

• If you want to change the dial code, enter a code 

that is between 1 to 4 digits long. Press 

 to save 

and continue.

• If you do not want to change the dial code,

press 

 to continue.

Step 4: Enter Relay Code

1.

Enter the relay code.

2.

Press 

 to save and continue.

Step 5: Enter NSL-ID

1.

Enter the NSL-ID.

2.

Press 

 to save and continue.

Step 6: Enter Elevator Code

• If elevator control is not being used, press 

 to 

continue.

• If elevator control is being used, please contact your 

technician for assistance.

 Add  New  Record
>Edit  Record

0

1000>
1001

Enter Dial Code
[ _ _ _ _ ]

Enter Relay Code
[ _ _ _ _ ]

Enter  NSL-ID
[ _ _ ]

Enter Elevator Code
[ _ _ ]

Summary of Contents for TAS-2000 Series





































Reviews: