background image

TAS-2000 NSL System User’s Guide

11

Setting Main and Aux Door DTMF

To set the main and aux door DTMF, you must be in 

Programming Mode

. Refer to 

Entering 

Programming Mode

 on page 2 for instructions.

Main Door DTMF setup

You have successfully set the main door DTMF. The display now returns to the programming menu.

Aux Door DTMF setup

You have successfully set the aux door DTMF. The display now returns to the programming menu.

Step 1: Select Main Door DTMF setup

1.

Press 

 (scroll up) or 

 (scroll down) to find 

“Main Door DTMF”.

2.

Press 

 when the arrow is beside “Main Door 

DTMF”. The display enters Main Door DTMF setup.

Step 2: Set Main Door DTMF

1.

Choose any digit between 0 and 9. This will become 
the designated (touch tone) number that opens the 
lobby door. the factory default is “9”.

2.

Press 

 to save and continue.

Step 1: Select Aux Door DTMF setup

• If you have just set up Main Door DTMF, the arrow is 

now pointed beside “Aux door DTMF”. Press 

 to 

enter Aux Door DTMF setup.

• If you have not just set up Main Door DTMF,

1. Press 

 (scroll up) or 

 (scroll down) to find 

“Main Door DTMF”.

2. Press 

 when the arrow is beside “Aux Door 

DTMF”. The display enters Aux Door DTMF setup.

Step 2: Set Aux Door DTMF

1.

Choose any digit between 0 and 9. The factory 
default is “6”.

2.

Press 

 to save and continue.

  Delete Record
>Main Door DTMF    

0

Main Door DTMF
[ 9 ]

  Main  Door  DTMF
>Aux  Door  DTMF    

0

0

Aux  Door DTMF
[ 6 ]

Summary of Contents for TAS-2000 Series





































Reviews: