Input
10 A
Maximum input current
350 W
Rated power
Speed control
4000 - 10000 rpm
Speed range
Protection
Yes
Overload protection
Yes
Overheat protection
Interfaces
Modbus RTU (RS-485)
Profinet I/O (gateway module)
4-bit digital inputs (15-33 VDC)
Input interfaces
Single pole, non-latching N/O relay, 250 VAC/ 125 VDC, 10 A
Output interfaces
Environmental
0 - 40 °C
Ambient temperature
Maximum 95% RH, non-corrosive, no dripping water
Humidity
-20 to 80 °C
Storage temperature
Dimensions
380 x 300 x 210 mm (W x H x D)
Motor drive cabinet
72 x 30 x 200 mm (W x H x D)
Motor drive
95 x 55 x 210 mm (W x H x D)
Motor drive mounted in DIN -rail holder
Safety instructions
Electrical installation must be carried out by a competent electrician!
The motor drive has been designed for fixed installations only.
Do not perform any voltage withstand tests on any part of the motor drive or the tool. Product safety has been
fully tested at the factory.
Ground yourself with an anti-static wristband before touching the motor drive (setting jumpers and similar
actions) to avoid electrostatic voltage discharge damage to the motor drive.
Warnings
Make sure that all the AC-DC power supplies are properly earthed and that the motor drive cannot come in
contact with live mains voltage.
5
en (original)
