34
MIRKA 10,000 OPM
ORBITAL SANDERS
Declaration of conformity
Mirka Ltd.
FI-66850 Jeppo, Finland
declare on our sole responsibility that the products 70 mm x 198 mm (3 in. x 8 in.), 75 mm x 100 mm (3 in. x 4 in.) & 81 mm x 133 mm
(3 in. x 5 in.) 10,000 OPM Orbital Sanders (See “Product Configuration/Specifications” table for particular model) to which this declara-
tion relates are in conformity with the following standard(s) or other normative document(s): EN ISO 12100:2010, EN ISO 11148-
8:2011, EN ISO 15744:2008 & EN ISO 28927-3:2009 in accordance with the regulation 2006/42/EC.
Place and date of issue
Company
Stefan Sjöberg, CEO
Operator Instructions
Includes – Please Read and Comply, Proper Use of Tool,
Work Stations, Putting the Tool Into Service, Operating Instruc-
tions, Product Configuration/Specifications Tables, Parts Page,
Parts List, Sander Spare Parts Kits, Troubleshooting Guide.
Important
Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Jeppo 04.06.2020
Original Instructions
Manufacturer/Supplier
Mirka Ltd.
66850 Jeppo, Finland
Tel: + 358 20 760 2111
Required Personal Safety Equipment
Safety Glasses
Breathing Masks
Safety Gloves
Ear Protection
WARNING
Always wear required personal safety protection in accordance with manufacturer’s instructions and local/national standards while
using this tool.
• Do not use a power tool if you are tired or under the influence of drugs, alcohol or medication.
• Read the Materials Safety Data Sheet (MSDS) for the working surface.
• Use the tool with dust extraction. A suitable dust extraction unit will reduce hazardous dust.
• Do not overreach. Keep proper footing and balance at all times.
• Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
• If any physical hand/wrist discomfort is experienced, stop working and seek medical attention.
Hand, wrist and arm injury may result from repetitive work, motion and overexposure to vibrations.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
• The tool is not electrically insulated. Check work area for live electricity, gas pipes, etc. before operation.
CAUTION
• Prevent unintentional starting.
• Remove pad wrench before connecting the tool to the air supply.
• Keep work area clean and well lit.
• Always ensure that the work piece to be sanded is firmly fixed.
• Before changing abrasive always disconnect the air supply.
Additional safety warnings
• Read all instructions before using this tool. All operators must be fully trained in usage and safety of this tool.
• All maintenance must be carried out by trained personnel. For service, contact Mirka authorized service centre!
• Always wear required safety equipment (see warnings).
• The operator must be in a secure position and have a firm grip and footing on a solid floor.
• Always ensure that the work piece to be sanded is firmly fixed.
• Check tool, backing pad, hose and fittings regularly for wear.
• Always take care to ensure your safety at work; never carry, store or leave the tool unattended with the air supply connected.
• Vacuum unit dust collection bag should be cleaned or replaced daily. Dust can be highly combustible.
Cleaning or replacing of bag also assures optimum performance.
• Do not exceed maximum recommended air pressure of 6.2 bar (90 psi).
• Take care to avoid entanglement of the moving parts of the tool with clothing, ties, hair, cleaning rags, etc.
• Keep hands clear of the spinning pad during use.
• If the tool appears to malfunction, remove from use immediately and arrange for service and repair.
• Before changing abrasive always disconnect the air supply. Take care to properly attach and centre the abrasive
on the backing pad.
Summary of Contents for OS 343CV
Page 1: ...70 mm x 198 mm 3 x 8 75 mm x 100 mm 3 x 4 81 mm x 133 mm 3 x 5...
Page 2: ......
Page 130: ......
Page 131: ......
