31
30
DC adapter
USB tip of
Mist-maker
Touch station
Touch Station, DC Adapter, and the USB Port of the Mist-maker
cannot be washed. These are the only modules that are not waterproof.
Do not wash them or submerge them in water.
Do NOT wash these modules
MUST READ
Please read before washing!
· Do NOT wash the USB port of the Mist-maker.
· Do NOT use hot water or boiling water to sterilize the unit.
This is not necessary and it will damage the unit.
· Do NOT use any harsh chemicals including but not excluded to vinegar,
acidic liquid, and baking soda.
· Do NOT use a tough scrubber. It will damage the unit.
Frequently Asked Questions (FAQs)
Please find the frequently asked questions below. If you continue
to have issues with the humidifier, please create a problem ticket
on support.mirohome.com or send us an email at support@mirohome.com
Issue
Check First
Possible Solution
My Miro humidifier is not
turning on.
Is the DC adapter plugged
in correctly?
Plug the DC adapter into
the power outlet correctly.
Is the Mist-maker, Fan,
Ultrasonic engine, and
USB cable installed
correctly?
Please double check
the manual to see if
these parts are installed
correctly.
Refer to page 8~10.
Is the power cable plugged
into the Touch Station?
Please check to see if the
power cable is plugged all the
way into the Touch Station.
Is the power cable plugged
into the Touch Station?
Please check to see if the
power cable is plugged
all the way into the Touch
Station.
There is water
condensation
around the humidifier.
There are various reasons
as to why the water
condensation may be
happening.
The temperature and
humidity may be causing
the water condensation.
When the air is completely
saturated(humid) the mist
will fall to the ground and
cause water condensation.
Reduce the output level
and try to open the
window every four hours.
Miro recommends using
Splash Guard and Noise
Muffler to help with the
water condensation issue.
