INSTALLATION CLEAN-UP
MAINTENANCE
It is important to remove all construction debris and
foreign material.
Remove construction dirt and residue with a mild liquid
detergent. DO NOT USE abrasive cleaners, scouring
compounds and pads, metal scrapers, steel wool, or other
materials that could damage or dull the surface of the
bath.
Remove plaster carefully with a blunt wooden block
having rounded edges.
Remove paint and other stubborn stains with isopropyl
(rubbing) alcohol.
DO NOT USE products such as acetone (nail polish
remover), dry cleaning solution, lacquer thinners,
gasoline, pine oil, etc.
Test the installation after completing the plumbing, but
before enclosing the bath and finishing the surroundings.
Fill the bath with water and leave it for one hour to ensure
that the adjustment of the drain-overflow assembly is
correct, and that there are no leaks.
The acrylic sheet, which forms the surface of your bathtub,
provides one of the most durable surfaces found in modern
bathrooms. Keep it bright and smooth with mild liquid
household detergent, soap and water, or foaming cleansers.
NEVER USE aromatic solvents, abrasive cleaners, scouring
compounds or pads, strong liquid cleansers, or other material
that could damage or dull the surface of the bath.
We recommend the use of Mirogloss Acrylic and Fiberglass
Polish before use and then periodically to preserve the
appearance of your bath. Mirogloss
is available from your
Mirolin dealer.
- Restore surface gloss by applying
a very fine rubbing compound and polishing the surface by
hand or with a power buffer. Finish with an application of
Mirogloss or a good quality automotive wax.
- Remove minor scratches and
scuffs as follows. First, wet sand the area with 600 grit wet
sandpaper until the surface is smooth. Then, restore the gloss
as described under
®
®
®
Restoring Surface Gloss.
Minor Repairs to Surface.
RESTORING SURFACE GLOSS.
We want you to be completely satisfied with our products and service. If you have any comments or suggestions, please call
toll free.
1-800-MIROLIN
84 201 / 41 502
19 Aug. 2011
3
Sunken or Island Installation.
It is most important that the tub rest solidly on the floor. The deck is not to be used to support the tub. Refer to Figure 1 and 2.
Critical:
Box height to be 18” (457 mm. ) high.
Tub weight to rest totally on support legs.
RIM OF SUNKEN OR ISLAND BATH
(MUST NOT CARRY ANY WEIGHT)
FALSE FLOOR (SUNKEN BATH) OR
DECK (ISLAND) INSTALLATION
JOINTS OF FALSE FLOOR OR DECK
(NOT FOR STRUCTURAL SUPPORT
OF BATH)
FIGURE 7 - METHOD OF SUPPORTING RIM OF SUNKEN
OR ISLAND BATH
SEALANT
TILE OR
OTHER
COVERING
60 Shorncliffe Rd., Toronto, Ontario M8Z 5K1
Telephone: (416) 231-9030 - Fax: (416) 231-0929
www.mirolin.com
Customer Service:
(416) 231-5790
Canada, U.S.A.: 1-800 -
(647-6546)
Fax, Canada: 1- 800 - 463 - 2236
MIROLIN
The company reserves the right to change models and specifications without notice.
C
US
