English –
5
English
STEP 2
2.1
– PRODUCT DESCRIPTION AND INTENDED USE
In general, the series of devices that make up this product serve to auto-
mate a sliding gate for residential applications (
fig. 1
).
Any other use than as specified herein or in environmental condi-
tions other than as stated in STEP 3 is to be considered improper
and is strictly prohibited!
The gearmotor comprises a 12 V dc motor, a pinion and a control unit.
The control unit powers all devices present in the system and manages all
relative functions. It is made up of a board and incorporated radio receiv-
er which receives the commands sent by a transmitter. It may also be
controlled via a wall-mounted keypad or a pair of photocells set with the
single opening command.
The control unit can control different types of manoeuvres, each program-
mable and usable according to specific requirements.
Special functions are also available to enable personalisation of automa-
tion use.
The automation enables the installation of various accessories which
enhance functionality and guarantee optimal safety. In particular, the con-
trol unit can memorise up to 150 keys of MT4 transmitters; up to 4 MK
control keypads or alternatively up to 4 pairs of MP photocells, set for the
opening command only.
Connections of the various devices are by means of a “Bus” cable. This
reduces complexity of the connection, as the “Bus” envisages the use of
a single cable between one device and another.
The product is mains-powered, and, in the event of a power failure
enables manual release of the gearmotor for manual movement of the
gate leafs.
In this situation, the gate can also be opened using the buffer battery (MB
model) if fitted on the system.
2.2
– COMPONENTS USED TO SET UP A
COMPLETE SYSTEM
fig. 2
illustrates all components used to set up a complete system, such
as that shown in
fig. 5
.
List of components:
[
a
] - electromechanical gearmotor
[
b
] - foundation plate
[
c
] - rack
[
d
] - rack fixing brackets
[
e
] - anchor bolts
[
f
] - reinforcement plates
[
g
] - keys for manual release of gearmotor
[
h
] - pair of photocells mod. MP (wall-mounted)
[
i
] - control keypad mod. MK (wall-mounted)
[
l
] - portable transmitter mod. MT4
[
m
]- flashing light mod. MF
[
n
] - metal hardware (screws, washers, etc.)
[
o
] - buffer battery mod. MB
WARNING!
Some components shown in
fig. 2
are optional and may not be
supplied in the pack.
KNOWLEDGE OF THE PRODUCT AND PREPARATION FOR INSTALLATION
1
a
b
i
m
n
o
h
l
2
c
e
f
g
d
