Misa Digital KITARA User Manual Download | Manualshive

Page: 29 / 32

background image

DECLARATION OF CONFORMITY

29

FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT

COMPLIANCE INFORMATION STATEMENT

NOTICE

Model Name :

Type of Equipment :

Responsible Party :

Address :

Telephone :

KITARA
Synthesizer Guitar
Misa Digital Technology Limited
21/F, 9 Chong Yip Street, Kwun Tong, Kowloon, Hong Kong
+852 2121 2332

This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modiﬁcation to this system can void the users authority to operate this equipment. This equipment requires shielded interface cables
in order to meet FCC class B Limit.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

AVIS

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.

USA

EUROPE

USA

CANADA

«
...
27
28
29
30
31
...
»

Summary of Contents for KITARA

































Reviews:

No comments

Related manuals for KITARA

Corvette Proline Act. EL/Pass PU

Brand: Warwick Pages: 1

Brand: Fender Pages: 20

Acoustasonic Player Telecaster

Brand: Fender Pages: 13

Brand: Django Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands