Miscea Remote Control, Instruction Manual

14

3. 

Use

3.6 

Change water shut off delay time 

Water shut off delay time refers to the duration of water flow from the point of time 

hands are outside the detection range of the water sector. For example, water 

continues to flow for (X) seconds after hands are removed from water sector.

Press the «DELAY» button. The water sector will light up. With the «+» and «-» buttons, 

the water shut off delay time can be changed. To save settings, press the «SAVE» 

button. All colored LED lights illuminate to indicate new setting has been saved. If 

«SAVE» button is not pressed within 10 seconds of last selection, previously saved 

setting will be stored.

There are 9 time settings available. Each time setting is indicated with a different beep 

tone. For miscea models with a display screen, this will also be indicated visually on 

screen. Please see Fig. C - E for technical data.

3.7 

Change water temperature memory time

Water temperature memory time refers to the duration for which the most recently 

used water temperature is temporarily stored in memory. For example, when the water 

temperature is altered and the water sector is activated in quick intervals, the last used 

temperature will be temporarily stored in the faucet memory for an (X) amount of time.

Press the «MEMO» button. The water sector will light up. The «+» and «-» sectors on 

the faucet will light up red and blue respectively. With the «+» and «-» buttons on the 

remote control, the water temperature memory time can be changed. To save settings, 

press the «SAVE» button. All colored LED lights illuminate to indicate new setting has 

been saved. If «SAVE» button is not pressed within 10 seconds of last selection, previ-

ously saved setting will be stored.

There are 9 settings available. Each setting is indicated with a different beep tone. For 

miscea models with a display screen, this will also be indicated visually on screen. 

Please see Fig. C - E for technical data.

3.8 

Change duration of bucket mode 

Duration of bucket mode refers to the length of time the system remains in the bucket 

mode after activation. This function is not available on all miscea models.

Press the «BUCKET» button. The water sector will light up. With the «+» and «-» 

buttons, the duration of time the system remains in bucket mode can be changed. To 

save settings, press the «SAVE» button. All colored LED lights illuminate to indicate 

new setting has been saved. If the «SAVE» button is not pressed within 10 seconds of 

last selection, previously saved setting will be stored. 

There are 9 settings available. Each setting is indicated with a different beep tone. 

Models with a display will also be indicated visually on screen. Please see Fig. C - E for 

technical data. 

DELAY

MEMO

BUCKET