10
Installation –
Mounting the Range Hood
For Mounting Under a Kitchen Cabinet
3UHSDUHGXFWORFDWLRQRQKRRGYHUWLFDORU
KRUL]RQWDO5HIHUWR3DJHVIRUGXFWLQJ
options.
2. Measure and cut out duct and electrical openings
in cabinet or wall to match up with the hood.
Ducting and electrical dimensions can be found
on Page 8. Note: Make sure duct opening is
large enough to apply aluminum duct tape to the
connection at the hood body.
3. Reinforce cabinet with 1”x2” wood strips if
additional strengthening is required or if cabinets
are framed.
5HPRYHEDIÀH¿OWHUVJUHDVHWUD\DQGVLGH
spacer panels from hood for access to hood
mounting key holes.
,QVWDOOZRRGVFUHZVLQWRFDELQHWERWWRPE\
following the installation screw hole dimensions
on Page 8. These screws will be used to secure
the hood to the cabinet.
6. Lift hood onto screws located on cabinet bottom
DQGORFNKRRGLQWRSODFH0DNHVXUHDOONH\
holes cover the screws. TIghten each screw to
secure hood to cabinet.
7. Install electrical.
8. Install duct work and seal with aluminum duct
tape.
5HLQVWDOOEDIÀH¿OWHUVJUHDVHWUD\DQGVLGH
spacer panels.
10. Power up hood, test all functions and check for
leaks around duct tape.
duct/silver
tape
5. Duct
opening
cutout
3. Add 1x2
wood strips
2. Baffle
filters
Summary of Contents for MH70330AS
Page 2: ......
