SHENZHEN MISENSE COMMUNICATION TECHNOLOGY CO., LTD.
WWW.MISENSECOM.COM
Page 8/16
2.4
Equipment electrify
SFP up link port: on the basis of different type of modules,
use net cable or optical fiber to connect up link port and
up-layer network equipment (such as switch, router).
CONSOLE port: use the DB9/RJ45 special connection
cable which is the accessory of the equipment to connect
CONSOLE port and DB9 interface of PC.
Manger port: use crossing-line or parallel line to connect
this port with PC or HUB.
NOTE: The net cable or fiber is no available when the
machine left the factory, and the user needs to prepare it.
2.5
Power requiement
The power of the board is supplied by common AC power
range is from: AC100
V～AC250V
Power consumption: < 15W
2.6
Equipment electrify
The board supports hot plug, and when the power is
applied to it, you could judge if it works normally or not
through the indicator light conditions. If the board has already
connected with power or started to work, the conditions of
