- 23 -
- 24 -
8.2 The initial interface
8.6 Main Menu
8.7 Statistics
8.8 E-Day
8.9 E-Month
8.3 PV input and DC current information
8.4 AC running state information
8.5 Temperature and software version
ON/OFF
<<
Setup
Device Info.
<<
Fault Record
GL1030 SN-01
ID:1707010001
ID:1707010001
Ver0201
Ver5102
Power: 108W
Normal
State:
PV1: 0.0V 0.0A
PV2: 0.0V 0.0A
UC: 0V 0.0A
Freq: 0.00Hz
Press UP or Down you can check inverter DC voltage, DC current, AC voltage,
AC current, inverter temperature, software version information.
7.2 Statistics information
You can check the inverter inside temp, LCD software Ver137 and inverter
software Ver1400. There are two black spot in the bottom right corner. The first
flash means inverter is communicating with LCD. The second flash means LCD
is communicating with Wifi plug
There are four submenu in the Main Menu
There are five submenu in the statistics
You can check the PV information, the number of strings input, MPPT voltage
and MPPT current.
You can check the three phase voltage, current, and grid currency
Into each submenu through cursor
This information is for technician’s reference
Temp:35.3
℃
C
