Guangzhou Miss Lighting Technology Co.,Ltd
36x18W LED Moving Head Light
2
1. Packing List
LED Par Can 1 pcs
User Manual 1 pcs
2. Specification
● Item No : ML-ML27
● Voltage: AC 90-240v, 50/60Hz
● Power consumption: 540w
● Lighting Source: 36 pcs 18w led
● Color: RGBWYA 6 in 1
● Control: DMX, master slave, sound active, auto mode.
● Beam angle: 10-50°
● Display: LCD display
● N.W.: 9 kg
● G.W.: 11 kg
● Carton size: 430×310×400mm
3. Installation Method
3.1 Installation Steps
1.
Please hand this light into the suitable place with suitable angel.
2.
To connect the signal cable, plug one side into IN socket in the back of light and plug another
side into OUT signal connector in the DMX 512 board(signal input: 1=>Ground, 2=>Data,
3=>data+).
3.
To connect the cable and put into power, them the light stay in the status to receive the
operation signal like : Music, Automatic, DMX512ect. Take note: Please out off the power
line if you will not operate it for a certain time.
3.2 Fixture Linking
To run your light shows of one or more fixtures using DMX-512 controller or to run
synchronized shows on two or more fixtures in master/slave operating mode , you need DMX
cables to link the units from DMX IN to DMX OUT.
Notice:
the length of signal cables should be within 100meters, to prevent the signal
interference by other appliances because of the long signal cables.
