Guangzhou Miss Lighting Technology Co.,Ltd
56*10W zoom moving head light
1
TABLE OF CONTENTS
1. Safety Instructions
....................................................................................................1
2. Technical Specifications
..........................................................................................2
3. How To Control The Unit
......................................................................................3
4. Trouble shooting
.......................................................................................................7
5. Fixture Cleaning
........................................................................................................7
6
. Technical Support
....................................................................................................8
statement
The product has well capability and intact packing when leave factory. All of
the
user should comply with warning item and manual, any misuse cause of the
damages are not included in our guarantee, and also can not be responsible
for any malfunction & problem owing to ignore the manual.
1. Safety Instructions
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the unit.
Before operating, ensure that the voltage and frequency of power supply
match the power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid
electric shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least
50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.
Disconnect main power before replacement or servicing.
Make sure there are no flammable materials close to the unit while operating as it is fire
hazard.
Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but
always by taking its base.
Maximum ambient temperature is Ta: 40
℃
. DO NOT operate it where the temperature is
higher than this Unit surface temperature may reach up to 85
℃
. DO NOT touch the housing
bare-hand during its operation. Turn off the power and allow about 15 minutes for the unit to
cool down before replacing or serving.
In the event of serious operating problem, stop using the unit immediately.Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage
