Guangzhou Miss Lighting Technology Co.,Ltd
56*10W zoom moving head light
2
or malfunction. Please contact the nearest authorized technical assistance center.
Always use the same type spare parts.
DO NOT touch any wire during operation as high voltage might be causing electric shock.
Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
DO NOT open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced if they
are visibly damaged.
Caution:
There are no user serviceable parts inside the unit. DO NOT open the housing or attempt
any repairs yourself. In the unlikely event your unit may require service, please contact
your nearest dealer.
Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. And make sure that
the structure to which you are attaching the unit is secure and is able to support a weight of
10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the
weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of
the touch of people and has no one pass by or under it.
2. Technical Specifications
Light Sources: 56 x 10W 4in1 RGBW LED
Beam Angle: 10°-60°
Power Consumption: 600W
Power Voltage: AC 100-240V, 50/60Hz
Dimension: 37*27*22cm
Packing Dimension: 47*38*50cm
Net Weight: 10Kgs
Gross Weight: 13Kgs
Control
DMX Channel: 14Channel
Control Modes: DMX
