14 GB
Note:
The distance to the foot rest is very im-
portant. Ensure it is correct so you can use the
foot rest
18
well.
Sit down, lift yourself up with both hands and
slide your bottom into the seat
16
. Adjust the
backrest so you are sitting straight.
Secure the seat
16
by attaching the snap hooks
on the four adjustable straps
17
to the D-rings
1c
on the board
1
.
Set the seat on the board
1
, the inside of the
backrest must always face toward the foot rest
18
.
Secure the backrest by attaching the four straps
17
with snap hooks to the four D-rings
1c
at
the back of the board
1
.
Position the seat
16
so your legs are slightly
bent when touching the foot rest
18
.
Mounting the board (Fig. L):
Stand next to the board (Fig. L1).
Place the paddle on the board
1
perpendicu-
lar to the centreline of the board, slightly in front
of the board transport handle
1d
(Fig. L2).
Now kneel on the board, behind the paddle,
in shallow water (Fig. L3). Grab the paddle but
do not pick it up. Your hands are far apart.
Now move one foot forward and position it on
the board
1
at about the level of the board
transport handle
1d
(Fig. L4). Place the other
foot next to the board transport handle
1d
.
Stand on the board
1
with your legs apart,
preferably to the right and left of the board
transport handle
1d
.
Now kneel all the way down, slightly back, whilst
picking the paddle up horizontally (Fig. L5).
Now slowly stand up; the paddle will help you
maintain your balance. You are standing on
the board with your legs apart (Fig. L6) and
can start to paddle.
Correct paddling technique (Fig. M):
Note:
The top arm holding the paddle handle
should always remain straight whilst paddling.
Insert the paddle in the water directly next to the
board
1
as far forward as possible (Fig. M1).
The lower arm holding the paddle at about
shoulder width is also straight (Fig. M2).
With the top arm straight, pull the paddle toward
you with the bottom arm (Fig. M3). Bend the
bottom arm in the process. Pull the paddle out
of the water at about your feet (M4). Repeat
the process.
Transport
Do not transport the inflated board
1
on
vehicles.
Backpack
10
:
All accessories can be stored in the backpack
10
for transport or storage.
Disassemble the product per chapter ”Disas-
sembling the product”.
Ensure it is completely clean, dry and rolled up.
Place the board
1
and all individual parts
and accessories stored inside the drybag
8
in
the backpack
10
(maximum weight capacity:
25 kg).
Drybag
8
:
Note:
Please note, the drybag
8
is not water-
proof. Do not store delicate objects, e.g. cameras,
in it.
Store the smaller accessories in the drybag
8
.
Close the hook-and-loop fastener.
Fold the hook-and-loop fastener twice.
Close the drybag
8
tight with the strap and
buckle.
Storage
Store the product in a dry, dust-free location,
protected from direct sunlight, where it will not
be exposed to extreme temperature fluctuations.
If the product will not be used for extended
periods, we recommend possibly storing the
board
1
flat and slightly inflated.
Store the product in a safe location, out of the
reach of children.
Do not place heavy or sharp objects on the
board
1
.
