INSTRUCTIONS
1.
Assemble the product and any accessory through a ball
head nut and tighten it (compatible with other ball head
diameter 17mm accessories), and fix it in an ideal position.
Connect the product to the QC3.0 car charger (optional)
with the data cable, and insert to the cigarette lighter
to get electricity.
2.
After the product is powered on, the indicator on the
both side will light, and the left and right telescopic arms
will automatically open after 5 seconds to wait for the mobile
phone to be placed; if the product does not turn on red after
power on (not turn on, or flash ) All indicate that there
is a problem with the product, please stop using it and return
it to the seller for processing.
3.
In order to ensure proper charging efficiency and stability,
adjust the bottom holder of the device so that the phone
is aligned as close to the center of the charging surface of
the stand as possible when it is inserted. Best distance for
wireless charging is up to 8 mm. Charging energy cannot
penetrate metal, so avoid using metal or excessively thick
(more than 3 mm) mobile phone covers. This is the only way
to ensure fast wireless charging of mobile phones.
4.
After inserting the phone, the left and right clamping
(locking) arms automatically clamp the phone. If the phone
supports the QI wireless charging protocol, the product will
simultaneously initiate wireless charging and the indicator
light will flash slowly as the product initiates this wireless
charging; if the phone does not support wireless charging,
the indicator light will flash rapidly for 5 seconds and then
the indicator light goes off. The maximum charging power
of this product is 15 W. Charging efficiency varies depending
on the charging environment and the type of mobile phone.
EN
