LCD MONITOR 15EX
LCD MONITOR 15EX
-
-
TA MAINTENANCE
TA MAINTENANCE
53
7.5
7.5
PC Can
PC Can
’
’
t Detect LCD Monitor Type.
t Detect LCD Monitor Type.
Symptom:
Symptom:
The PC PNP Operation System Can
The PC PNP Operation System Can
’
’
t Detect The LCD Monitor Type.
t Detect The LCD Monitor Type.
LCD Detected Abnormal
LCD Detected Abnormal
Board-level
Troubleshooting
Is it
OK?
YES
NO
Replace faulty cable.
Is it
OK?
NO
YES
END
Replace PC to monitor cable.
Check the following parts for cold solder or one of the
following parts on the mother-board may be defective,
use an oscilloscope to check the following signal or
replace the parts one at a time and test after each
replacement.
1. Make sure the PC VGA adapter is good.
2. Check the VGA cable is connected to PC properly.
3. Make sure all cable and PCB connect properly.
Signals:
J1
U5
R54~R58
C64~C66
B3,B4,B6
R5,D5
B1,D1
VSYNC
DDC_SCL
DDC_SDA
DDC+5V
+5V
VCC_FROM_PC
Parts:
Replace
15EX-TA Interface Board
or
go into board level Trouble-shooting.