6
Processor
MITAC Desktop Board
PD10AI
includes
a
passively-cooled,
Intel Apollo Lake N3350/N4200
processor
with
integrated
graphics
and
memory
controller.
The
processor
is
soldered
to
the
Desktop
Board
and
is
not
customer
upgradeable.
NOTE
The
board
is
designed
to
be
passively
cooled
in
a
properly
ventilated
chassis.
Chassis
venting
locations
are
recommended
above
the
processor
heatsink
area
for
maximum
heat
dissipation
effectiveness.
System
Memory
NOTE
To
be
fully
compliant
with
all
applicable
SDRAM
memory
specifications,
the
board
should
be
populated
with
DIMMs
that
support
the
Serial
Presence
Detect
(SPD)
data
structure.
If
your
memory
modules
do
not
support
SPD,
you
will
see
a
notification
to
this
effect
on
the
screen
at
power
up.
The
BIOS
will
attempt
to
configure
the
memory
controller
for
normal
operation.
The
Desktop
Board
has
two
204-pin
DDR3L
SO-DIMM
sockets
with
gold-plated
contacts.
These
sockets
support:
Support
for
DDR3L
SO-DIMMs
Serial
Presence
Detect
(SPD)
memory
only
Non-ECC
memory
Up
to
8
GB
of
memory (on a single SO-DIMM or 4 GB each by 2 SO-DIMM)
