MiTAC Ulmo, Quick Start Manual

Charging the battery 

When charging the battery for the very first time, you should charge it for at least 8 hours 
using the provided AC charger.  

WARNING: The device provides a dedicated AC charger that is with specially designed circuit 
inside. You are not allowed to use the third-party charger (such as a generic USB charger) while 
charging the battery to avoid any damage to the equipment. 

CAUTION: For optimal performance of the lithium battery: 

„

Do not charge the battery where the temperature is high (e.g. in direct sunlight). 

„

Recharge the battery when it is nearly discharged. When recharging, make sure that the battery is 
fully charged. Doing so can extend the battery life. 

„

If you will not use the product for a long period of time (over one month) or find the discharge/recharge 
time has been shortened, be sure to fully discharge the battery first before recharging it. You are also 
advised to fully discharge and recharge the battery once every 1~2 months. 

„

Failure to follow the battery usage instructions could cause damage to your device, battery and even 
bodily injury or property damage and will void the warranty. 

1.

Plug the converter to the AC charger (

n

).

Note: The converter plug varies with the region 
of your purchase. 

2.

Open the cover on the bottom panel of 
the device to locate the mini-USB 
connector. Connect the DC end of the AC 
charger to the mini-USB connector on 
your device (

o

).

3.

Plug the other end of the AC charger into 
a wall outlet (

Z

).

1

3

2

2