Safety, Operation, & Maintenance Manual
Linear Cut Processing Systems
17
2
Safety Symbol Definitions
The safety symbols shown in this section are found throughout the manual
to indicate hazards related to this machine. All personnel expected to
operate or maintain this machine should be familiar with these safety
symbols and their meanings.
User caution. It indicates a condition where
equipment damage resulting in injury could
occur if operational procedures are not followed.
To reduce risk of damage or injury, refer to
accompanying documents, and follow all steps or
procedures as instructed.
Electrical hazard. It indicates dangerous high
voltages inside of an enclosure and/or the
presence of a power source. To reduce the risk of
fire or electric shock, do not attempt to open the
enclosure or gain access to areas where you are
not instructed to do so. Refer servicing to
qualified service personnel only.
This equipment should be operated only from the
type of source indicated on the manufacturer’s
identification label. Installation should be in
compliance with applicable sections of the
national electric code. Consult your local building
code before installing.
Crush hazard. Keep hands and other body parts clear.
Noise hazard. Equipment produces loud noise in excess of 100
DBA during operation. Use appropriate PPE to protect
hearing when in the vicinity of this equipment.
