Safety, Operation, & Maintenance Manual
Linear Cut Processing Systems
27
4.2
Optional Features
•
Bottom plate printer (E)
– An optional device used to perform labeling or place
other information onto the media being processed. The bottom plate printer
marks the part face that is resting on the infeed conveyor. If the incoming
boards are stacked 2- high, only the bottom plate receives face printing.
•
Material Auto Loading Live Deck (A)
– A staging conveyor that transports the
lumber (placed there by the operator) and advances 1 piece (or stack) at a time
for automatic loading onto the Infeed Rail.
•
Outfeed sweep arm assembly (F)
– A combination of a steel-top table and
sweep arm on the outfeed that automatically moves processed boards onto the
table to be removed by the operator.
4.3
Dust Extraction Methods
One port is available for dust extraction from the saw chamber. It is highly
recommended that a dust extraction method is used during operation. A dust extractor
for Hornet should have a suction capacity of 800 CFM.
4.4
Air Valve Assemblies
There are two air valve assembles located on the Hornet. One is on the saw unit,
mounted to the electrical panel, between the panel and the HMI enclosure, as shown
here:
