Safety, Operation, & Maintenance Manual
Linear Cut Processing Systems
59
8.4.2
Populating Cut Sets from a Specified Job
The Jobs, Bundles, Part Type, Materials, and Cut Part panes can be used to
populate the Cut Set panel which determines what is cut next. See the
section for more information on the specific panes.
For example:
A job contains all the parts of a house and has many different
dimensional lumbers in use. You want to cut only the part types that
are 2x4s used for Bottom Plates and Top Plates. Place toggles on
those items, as shown below, and the cutting solution will only
include those items in the cutting mix. When you want to cut the
rest of the items, simply follow the same principal and toggle on the
other items.
The following graphic highlights the 5 panes required to achieve this example:
