Safety, Operation, & Maintenance Manual
Linear Cut Processing Systems
94
9.9.4.2
Re-Using a Cartridge After an Operational Pause
1.
Once a cartridge has been used, follow these guidelines to improve its shelf
life:
o
Unused for less than 1 day: Leave cartridges in machine and clean
and purge before next use
o
Unused for more than 1 day: Remove cartridges from
machine, clean as described in the cleaning section, and
place in airtight container. Clean and purge before next
use
o
Cartridges should always be stored with the nozzles facing down.
2.
Upon removing the print cartridge from its container for re-use, clean as
described in the
Removing and Replacing Ink Cartridges
3.
Install the cartridge according to the instructions in the
4.
Use the Ink Spit function to make all the ink cartridges emit a burst of ink
spray onto scrap material. Ensure all cartridges emit a clear, dark line. See
Removing and Replacing Ink Cartridges
9.9.4.3
Storage and Environment
•
Operating temperature of ink: 13°-35°C (55°–95°F)
•
Storage & transportation temperature (anytime a cartridge is not
propelling ink): 10°-35°C (50°–95°F)
•
Shelf Life: 6 months (less if cartridge has been used)
•
Do NOT shake the cartridge. Handle with care.
Take care never to let ink cartridges freeze. Freezing will cause the water in the
ink to separate and will ruin the cartridge. Cartridges ordered during the winter
months must be shipped via air freight to ensure they are always kept above
freezing temps.
9.9.4.4
Ordering Replacement Ink Cartridges
To order replacement ink cartridges, contact MiTek Automation Support at 1-800-523-
3380.