Mitel 5005, User Manual

User Guide

- 4 -

Initializing And Registering The Phone

IP phone initialization occurs automatically when the set is connected to the network.

CAUTION: During the initialization process, the phone may download crucial "boot" data from
the TFTP server on the network. This will be indicated by the display screen showing DO NOT
POWER DOWN and the light indicator (LED) flashing. DO NOT POWER DOWN OR TURN OFF
THE PHONE DURING THIS PROCESS! If the phone is powered down at this point, "boot" data
is likely to be corrupted and the phone will not boot up properly when powered on.

All IP sets are required to complete PIN registration. This registration results in a MAC address being
assigned in the MAC Address Assignment form. The 5005 IP phone will register with the 3100 ICP
automatically.

Once the phone is registered, it can be moved to any switched 10/100baseT port that is reachable by
the 3100 ICP, DHCP and TFTP servers servicing the IP phones so long as the phone is locally
powered. The phone will automatically boot and re-register with the 3100 ICP system whenever it is
moved.

Note: Initializing and registering the 5005 IP phone is a procedure that should only be carried out
either by a trained technician or your System Administrator. Please consult with your System
Administrator before performing any procedures that may have an adverse effect on the
performance of the phone.

Using The 5005 IP Phone

About Using The 5005 IP Phone

The 5005 IP Phone is a single-port telephone designed for use with a Mitel Networks 3100 Integrated
Communications Platform (ICP) integrated with your organization’s network.

Related Topics

Adjusting Volume Levels

Telephone Status Indicators

Adjusting Display Contrast

Programming The Function Keys

Desktop Stand

Mounting The Phone On The Wall

About Call Handling

Telephone Status Indicators

Situation:

The message waiting indicator is:

Line is idle

Off

Line is ringing

Flashing rapidly

Message waiting/Voicemail

Flashing slowly