-16-
Auto-Answer
To enable or disable Auto-Answer when you are using a headset:
z
Press the Auto-Answer feature key Note: When Auto-Answer is
enabled, the (MUTE) key light flashes rapidly to notify you of an
incoming handsfree call.
To enable or disable Auto-Answer on a 5224 IP Phone only:
1. Press
(SUPERKEY).
2. Press the No softkey until "Auto Answer?" appears.
3. Do one of the following:
To enable Auto-Answer, press the TurnOn softkey.
To disable Auto-Answer, press the TurnOff softkey.
Note: When Auto-Answer is enabled, the (MUTE) key light flashes
rapidly to notify you when an incoming handsfree call has been
established.
To answer a call when you hear ringback:
z
Begin speaking. Your phone's Handsfree microphone and Handsfree
speaker transmit and receive audio. Your phone's (MUTE) key light
flashes rapidly to indicate that the Handsfree microphone is on and the
calling party can hear you.
To temporarily mute the Handsfree microphone:
z
Press (MUTE). The (MUTE) key light turns ON solid.
To turn Mute off and return to the conversation:
z
Press (MUTE). The (MUTE) key light turns OFF.
To end a call, do one of the following:
z
Press (CANCEL).
z
Wait for the caller to hang up.
Summary of Contents for 5224
Page 1: ...USER GUIDE SX 200 ICP USER GUIDE ...
Page 2: ...SX 200 ICP 3 0 ...
Page 8: ... 2 The 5212 IP Phone ...
Page 9: ... 3 The 5224 IP Phone ...